Commercial · Des Moines, IA
For long-lasting control of stormwater and traffic edges, Quality Concrete Des Moines installs concrete curb and gutter systems that hold grade and drain cleanly. Serving Des Moines since 2015, we build new curbs, replace failed sections, and tie into asphalt, sidewalks, and driveway aprons with tight lines and durable concrete.
Good curb and gutter starts below the concrete. We verify grades, locate utilities, and set stringlines for flow line and reveal, then excavate to reach firm subgrade. Base prep typically includes compacted granular material (often 4-6 inches of crushed limestone or road base) placed and compacted with a plate compactor, with soft spots undercut and replaced. Forms or a slipform curb machine are set to line and elevation, dowels are drilled and epoxied where we tie into existing slabs, and reinforcement is placed as specified before the pour is scheduled.
Iowa freeze-thaw and deicing salts demand an air-entrained mix and tight finishing practices. We place a 4,000 psi class concrete with proper air content, consolidate along the back of curb and gutter pan, and strike to grade so water moves to inlets instead of ponding. Joints are cut or tooled at proper spacing to control cracking, and transitions at driveway entrances and radii are shaped for turning traffic and plow clearance. Finishes are selected for use, broom-finish for traction on the pan and returns, smooth steel-trowel only where appropriate, with edges tooled and the top of curb kept straight for a clean, consistent line.
Des Moines customers choose us because we build for drainage first, not just appearance. We pay attention to cross-slope, flow line, and how the curb ties into the street, asphalt, sidewalk ramps, and downspout discharge so water does not undermine the base. Our crews show up with the right equipment, including laser levels, plate compactors, and saws for clean jointing, and we keep the site organized for businesses and homeowners. Quality Concrete Des Moines is licensed and insured, and we provide a clear written estimate so scope, lengths, and tie-ins are spelled out before work begins.
Before we call the job complete, we walk the curb line with you and verify drainage, joint layout, and transitions at aprons, radii, and existing pavement. You get a clean work area, proper cure (wet cure or curing compound as conditions require), and straightforward guidance on protection and opening to traffic. We also coordinate practical details like dumpster placement, access lanes, and staged pours for parking lots or drive lanes when needed. The result is a concrete curb and gutter installation that holds grade, resists spalling, and protects your pavement edges for years of service.
Yes. We provide a free written estimate after an on-site measure so the scope, thickness, reinforcement, joints, and finish are clear.
Yes. We handle demolition, disposal, and base rebuild as part of replacement work, including driveway and patio tear-out.
Yes. We install stamped patterns with integral color or color hardener, then apply appropriate release and sealing based on use and exposure.
Common options include broom-finish for traction, trowel-finish for interiors, exposed aggregate, and decorative stamped textures. We will recommend the right finish for safety, drainage, and appearance.
Yes. We set grades and slopes to move water away from structures and reduce ponding, and we can adjust elevations at garage approaches, sidewalks, and patios when needed.
A properly built concrete curb and gutter system does more than define an edge, it controls stormwater, protects asphalt and landscaping, and reduces long-term maintenance. Quality Concrete Des Moines installs and replaces curb and gutter for parking lots, private roads, HOA drives, and residential driveways, with grades and joints laid out to move water where it belongs. Our process focuses on stable base prep, accurate elevation control, and durable concrete designed for Iowa weather.
Whether you need new construction curb and gutter or replacement of cracked, heaved sections, the details matter. We start with grade checks and layout using stringlines and laser levels, then excavate to firm subgrade. Base material is placed in lifts and compacted, because poor compaction is a common cause of settlement and standing water. Where we tie into existing slabs, we drill and epoxy dowels to reduce differential movement and improve load transfer at transitions.
During placement we focus on consolidation, straightness, and consistent reveal, then tool edges and form or saw joints at planned spacing. We can build standard straight runs, curb returns, radii, driveway aprons, and tie-ins to sidewalk ramps and asphalt overlays. After finishing, curing is handled to reduce surface drying and scaling risk, especially during hot, windy, or cool conditions.
If you are planning a parking lot upgrade, roadway repair, or driveway rebuild, curb and gutter should be part of the drainage plan, not an afterthought. Share your lengths, tie-in points, and drainage goals, and we will provide a written estimate and practical recommendations for phasing, access, and durability.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Des Moines. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
