Residential · Des Moines, IA
A well-built concrete pool deck should drain fast, stay slip-resistant, and handle freeze-thaw without scaling. Quality Concrete Des Moines has served since 2015, pouring and replacing concrete pool decks in Des Moines with clean layouts, safe edges, and durable finishes.
Pool-deck durability starts below the slab. We remove failed concrete, verify setbacks and elevations, and establish drainage away from the pool and house before any pour. Base work typically includes 4-6 inches of compacted crushed limestone (IA DOT gradation when specified), geotextile fabric over soft subgrade, and mechanical compaction with a plate compactor. We set forms, stake and brace to hold line, then place reinforcement (fiber mesh and, where needed, #3 or #4 rebar on chairs) to reduce cracking and improve load distribution.
Central Iowa weather is hard on flatwork, so mix design and finishing matter. We use air-entrained concrete suited for freeze-thaw exposure, place control joints to manage shrinkage cracking, and slope the deck (commonly 1/8-1/4 inch per foot) to move water off the surface. Finish options include broom-finish for traction, light salt-texture, exposed aggregate, and stamped patterns with non-slip additives and color hardener when requested. We also detail edges and expansion joints at the pool coping and against structures to limit spalling and prevent the deck from binding.
Customers in Des Moines choose us because we treat pool decks like precision flatwork, not generic patio pours. You get a written plan for demo, base thickness, reinforcement, joint layout, and finish so expectations are clear before scheduling. We are licensed and insured, and we show up with the right equipment for clean, efficient work, including concrete saws for straight cuts, mixers or ready-mix coordination, vibratory screeds, and professional finishing tools. The goal is simple: a deck that looks clean on day one and performs for years with normal maintenance.
Before we pour, we walk the site with you to confirm slope direction, step transitions, equipment-pad tie-ins, and any conduit or drain needs. After placement, we explain curing, sealing options, and realistic timelines (light foot traffic is often possible in 24-48 hours, with full strength reached around 28 days depending on conditions). You receive a tidy jobsite, straight joints, consistent texture, and a deck built for drainage and slip resistance, plus clear guidance on sealing and de-icing products to avoid. If you are replacing an old deck, we also coordinate haul-off and leave the pool area ready for use.
Yes. We provide a free written estimate after an on-site measure so the scope, thickness, reinforcement, joints, and finish are clear.
Yes. We handle demolition, disposal, and base rebuild as part of replacement work, including driveway and patio tear-out.
Yes. We install stamped patterns with integral color or color hardener, then apply appropriate release and sealing based on use and exposure.
Common options include broom-finish for traction, trowel-finish for interiors, exposed aggregate, and decorative stamped textures. We will recommend the right finish for safety, drainage, and appearance.
Yes. We set grades and slopes to move water away from structures and reduce ponding, and we can adjust elevations at garage approaches, sidewalks, and patios when needed.
A concrete pool deck has to do more than look good. It needs reliable drainage, slip resistance, and a mix design that holds up to Iowa freeze-thaw cycles, pool chemicals, and constant wet-dry swings. Quality Concrete Des Moines builds and replaces concrete pool decks with proper base preparation, smart jointing, and finishes that keep bare feet comfortable while reducing slip risk. Whether you need a simple broom-finish deck or a decorative stamped layout with borders, we focus on clean grades, durable edges, and straightforward maintenance.
Most pool-deck failures start with poor base and trapped water. We excavate to suitable subgrade, install compacted crushed limestone, and use geotextile fabric when soils are soft. Forms are set to match elevations at coping, steps, and doors, then reinforcement is placed as specified. Concrete is placed, screeded, and floated to a consistent plane, with joints cut or tooled at planned intervals to help the slab crack where it should, not across the middle of the deck.
Finish selection affects safety and long-term appearance. Broom-finish is a common choice for traction and easy care. Exposed aggregate offers a grippy surface with a decorative look, while stamped concrete provides patterns and borders when you want a more customized design. For decorative work, we can add color hardener and a non-slip additive, then apply a sealer suited for pool environments. We will also advise on curing, sealing schedules, and the right way to use de-icers around your pool area to reduce scaling and spalling.
If you are planning a new build or replacing a worn-out slab, we will review access, demolition needs, drainage direction, and any tie-ins to patios, equipment pads, or walkways. You get a free written estimate, clear scope, and a pool deck built to handle daily use and Des Moines weather.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Des Moines. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
